How to build Falcon: a printable mechanical toy
Falcon sweeps its wings when you work its tail, driven by a double slider-rocker linkage.
Falcon assembly video
The video is being filmed. Until it’s ready, the 8 illustrated assembly pages in the blueprint pack show every step.
Toy facts
- Crafting Tier
- 6 of 6
- Parts
- 10
- Cut-line segments
- 273
- Fold-line segments
- 100
Parts
Each part of the assembly video, with a link to its place in the video, appears here when the video is published.
Featured Mechanism:
- Actuator
- Part you move by hand to work the mechanism.
- Connecting Rod
- Rod linking two moving parts, pivoting at both ends.
- Double Slider-Rocker
- Two slider-rocker linkages that share one slider, so one sliding part swings two rockers.
- Driver
- Part that drives another part (the follower).
- Follower
- Part that is driven by another part (the driver) and follows its motion.
- Hinge
- Joint that lets a part swing about a line.
- Lamination
- Layers glued together for strength.
- Slider
- Part that moves in a straight line along a guide.
- Spiral Reinforcement
- Spiral-rolled insert that stiffens a rod.
- Standoff
- Spacer that holds a part at a set distance from another.
Extension activities for Falcon
After the build, these classroom activities turn the finished toy into measured, written work. Each comes as a teacher’s sheet, a student worksheet and an answer key, and each is matched to standards on the standards pages.
Design Challenge
Follow-on lesson, about 45 minutes · Also needs: protractorStudents choose one thing to improve on the finished toy and take it through a full design cycle: define, generate and compare, draw, test, evaluate. Comes with the Fair Test and Compare and Combine.
Words at Work
Short activity, 10 to 20 minutesStudents show they know what the engineering words and the blueprint symbols mean.
Read the Manual
Short activity, 10 to 20 minutesStudents explain what the manual's pictures show and why the steps come in that order.
How It Works
Short activity, 10 to 20 minutesStudents write an explanation of the toy with a labelled drawing.
Lines, Angles and Symmetry
Short activity, 10 to 20 minutes · Also needs: a second print of one blueprint page, protractorStudents find the geometry that is already drawn on the blueprint.
How Much Carton Board?
Short activity, 10 to 20 minutes · Also needs: a second print of one blueprint pageStudents work out how much carton board and how much cutting one part takes.
Check the Scale
Short activity, 10 to 20 minutesStudents confirm the blueprint printed at the right size, and work out what to do if it did not.
Measure the Motion
Short activity, 10 to 20 minutes · Also needs: protractorStudents measure how much comes out of a mechanism for what goes in.
Show and Explain
Short activity, 10 to 20 minutesStudents present the finished toy to the class, with the toy and a labelled drawing as the display.
Manual and Video
Short activity, 10 to 20 minutesStudents compare what the assembly video shows with what the manual shows for one step.